夾套保溫泵適宜輸送輸送高粘度樹脂,聚氨酯,聚醚等介質泵

    夾套保溫泵的結構特點:The structure of the jacketed heat pump features:
    夾套保溫泵用于輸送高粘度樹脂,聚氨酯,聚謎,聚乙烯等類似的高粘度物料，夾套保溫泵是根據石油、化工、涂料、油脂、醫藥、染料、食品等行業的需求，研制開發的新型容積式泵，由于該產品可選用不同的材質和其獨特的結構，夾套保溫泵、保溫泵廣泛應用于不同性質，不同粘度的介質輸送。 　
     適用介質溫度：-10℃ —200℃。適用介質粘度：1.0cSt—300,000cSt。 Jacketed heat pump used to transport high viscosity resin, polyurethane, polyethylene mystery, polyethylene and other similar high viscosity material, jacketed heat pump is according to the petroleum, chemical industry, paint, oil, medicine, dyes, food and other industries demand, research and development of a new type of positive displacement pump, because the product can choose different material and its
independence, the structure of the jacketed heat pump, heat pump is widely used in different nature, different viscosity of medium transmission.Applicable medium temperature: - 10 ℃, 200 ℃.Applicable medium viscosity: 1.0 cSt - 300000 cSt.
　  優點（1）輸送液體平穩，無脈動，振動小，噪音低。 �。�2）有很強的自吸性能。 　（3）正確選用零件材料，可輸送多種有腐蝕性的介質，使用溫度可200℃。 　（4）內外轉子Advantages: (1) smooth conveying liquid, no pulsation, little vibration, low noise.(2) has a strong self-priming performance.(3) the
correct selection of component materials, can transport a variety of corrosive medium, using temperature is 200 ℃.(4) inner and outer rotor
    用途:USES:別適用高粘度稠度介質的輸送。泵頭部、泵殼體、密封腔部分均可以帶保溫夾套。根據實際需要選擇需要保溫的位置。夾套與泵體鑄造成一體，保溫效果良好，能夠避免焊接夾套產生的各種問題。需加熱時：通過熱蒸氣、導熱油等各種熱媒通入夾套腔即可進行保溫。需冷卻時：通過各種冷卻液，可以保持泵體的恒溫。Especially forhigh viscosity medium consistency of delivery.The pump head, pump shell, seal chamber parts can with insulation jacket.According to the actual need choose the location of the heat reservation.Jacket and pump body casting into an organic whole, heat preservation effect is good, can avoid weldingall kinds of problems.: when heating by hot steam, heat conduction oil and other heat medium access jacketed cavity insulation can be achieved.When need cooling: through a variety of cooling fluid, pump body can maintain a constant temperature.
    廣泛應用于各種流體的輸送行業，尤其對于處理粘度變化較大、范圍較寬的流體輸送�！�應用行業：適用于輸送純凈且有一定粘度的流體，可用于輸送油品如潤滑油、原油等；也可以用來輸送橡膠、瀝青、油漆、粘合劑、染料、涂料、潤滑劑、多元醇、食品、藥品等不含顆粒性雜質的高粘度物料；還可用于輸送PA PB PC PE PS HIPS ABS PP PET PVA等高溫、高粘度聚合物熔體物料。
     夾套保溫泵的結構特點如下 : The structure of the jacketed heat pump features below:
    夾套保溫泵體分為普通與不銹鋼兩種材質，均帶有保溫套，適用于常溫下有凝固性或結晶而通過加溫并保持一定溫度又容易流動且有潤滑性的液體，以及高寒地區室外安裝和工藝過程中需要保溫的場合。Jacketed heat pump body is divided into ordinary and two kinds of stainless steel material, with thermal insulation cover, under applicable interesting coagulability or crystallization by heating and maintain a certain temperature and lubricity and easy flow of liquid, need in the process of the high altitude and outdoor installation process and heat preservation. 該夾套保溫泵的泵體設有空心夾層，并設有進出口法蘭，可用于導熱油、蒸氣、熱水、冷水等媒體對輸送的液體和泵進行保溫、加熱及冷卻。瀝青保溫泵開始工作時首先預熱降低了泵的起動功率。適用于輸送有腐蝕性或無腐蝕性、衛生條件要求較高的液體，輸送介質不含固體顆粒，溫度不高于 350 ℃ ，粘度為 5cSt——1500cSt 的液體，如各種化工原料、灌裝醫藥、食品、化妝品、農藥、洗滌劑、印染、釀造、樹脂、膠類等行業。該泵傳動方式有電機直聯和減速機兩種，當液體粘度超過 1500cSt 時，應采用減速機傳動。The jacketed heat pump pump body has a hollow nterlayer, with import and export of flange, can be used in the thermal oil, steam, hot water, cold water and other media to the transportation of liquid and pump for heat preservation, heating and cooling.Asphalt heat pump starts to work first preheating reduces the starting power of the pump.Applicable to transport corrosive or non-corrosive, health conditions to demand higher liquid, medium not containing solid particles, the temperature is not higher than 350 ℃, the viscosity of liquid for 5 CST - 1500 CST, such as filling a variety of chemical raw materials, pharmaceutical, food, cosmetics, pesticide, detergent, printing and dyeing, brewing, resin, rubber and other industries.The pump drive way has two kinds of motor and deceleration machine, when more than 1500 CST liquid viscosity reducer drive should be adopted.